usage method
1. It can contact the acid and alkali rubber gloves with concentration below 40%. If it contacts the acid and alkali solution with concentration above 40% for a short time, it should be washed with clean water immediately after use to avoid shortening the use time.
2. Contact with strong oxidizing acid, such as nitric acid and chromic acid, will cause product embrittlement, discoloration and early damage due to strong oxidation. High concentration of strong oxidizing acid may even cause burning loss, which should be noted.
3. Latex industrial gloves are only suitable for weak acid, sulfuric acid, hydrochloric acid and various salts with low concentration, and shall not be exposed to strong oxidizing acids such as nitric acid.
4. General latex work gloves and agricultural gloves are only suitable for contact with general pollutants, and can not be used for contact with acid and alkali.
5. Avoid contact with gasoline, engine oil, lubricating oil and various organic solvents during use; Prevent sharp metal cutting and contact with high temperature.
6. After use, the surface acid and alkali liquid or dirt shall be washed and dried with clean water, and shall not be exposed and baked. If it is not used for a long time, a small amount of talcum powder can be sprayed to avoid adhesion.
Precautions for use
1. Protective gloves should be the right size. The size of gloves should be appropriate. If the gloves are too tight, it will restrict blood circulation, easily cause fatigue and discomfort; If it is too loose, it is not flexible and easy to fall off.
2. There are many kinds of protective gloves, which should be selected according to the purpose. First of all, it is necessary to define the protection object, and then select it carefully. It must be misused to avoid accidents.
3. Before each use, the appearance inspection must be carefully carried out, and the gas shall be blown into the glove by air blowing method, and the cuff of the glove shall be pinched by hand to prevent air leakage, and observe whether the glove will leak by itself. The gloves can only be used if there is no air leakage. Insulating gloves can still be used when they are slightly damaged, but a pair of yarn or leather gloves should be covered outside the insulating gloves to ensure safety.
4. The gloves made of natural rubber shall not be in contact with acid, alkali and oil for a long time and shall be protected from piercing by sharp objects. After use, clean and dry the gloves. After sprinkling talcum powder on the inside and outside of the gloves, keep them properly. Do not press or heat them during storage.
5. The color of all rubber, latex and synthetic rubber gloves must be uniform. The thickness of other parts of the gloves should not differ much except for the thicker hand and palm, and the surface should be smooth (except for those with stripes or granular anti-slip patterns made on the face of the hand for anti-slip). No more than 1 5mm bubbles exist, slight wrinkles are allowed, but cracks are not allowed.
6. In addition to the selection of insulating gloves according to the regulations, the voltage strength shall be rechecked after one year of use, and the unqualified ones shall not be used as insulating gloves again.